§ 16.21.030. DEVELOPMENT STANDARDS.
Latest version.
- (A) Table 21-2 identifies the development standards that apply to all development in the C/LI, LI, I and M-1 zones.TABLE 21-2
Development Standards - Industrial ZonesDevelopment StandardsZoneC/LIC/LI (IP)LILI(IP)II(IP)M-11. Minimum size for Industrial subdivision (see Section 16.21.030(B))5 acre5 acre5 acre5 acre5 acre5 acre5 acre2. Minimum Lot Size6,000 sf6,000 sf10,000 sf10,000 sf1 acre1 acre1 acre3. Minimum Lot Width60 ft.60 ft.60 ft.60 ft.60 ft.60 ft.50 ft.4. Minimum Lot Depth80 ft.80 ft.100 ft.100 ft.200 ft.200 ft.200 ft.5. Floor Area Ratio (FAR)- Maximum (a)0.350.250.350.250.350.250.356. Front Yard Setback - Minimum10 ft.20 ft.10 ft.20 ft.5 ft.20 ft.5 ft.b7. Side Yard Setback - Minimum* Interior0 ft.5 ft0 ft.5 ft0 ft.5 ft0 ft.* Street Side10 ft.20 ft.10 ft.20 ft.5 ft.20 ft.5 ft.* Abutting residential zone15 ft.15 ft.15 ft.15 ft.20 ft.20 ft.5 ft.8. Rear Yard Setback - Minimum* Abutting nonresidential zone0 ft.5 ft.0 ft.5 ft.0 ft.5 ft.0 ft.* Abutting residential zone40 ft.40 ft.40 ft.40 ft.50 ft.50 ft.5 ft.9. Lot Coverage - Maximum80%75%85%80%85%80%85%10. Building Height - Maximum35 ft.35 ft.45 ft.45 ft.45 ft.45 ft.45 ft.Abbreviations: sf = square feet, ft. = feetNote: a) Additional FAR may be approved through Conditional Use Permit review and approval.b) All buildings must be located not nearer than 35 feet from the center line of the street or 5 feet, whichever is greater.(B) Additional standard for Industrial Park (IP) Overlay Zone. Every industrial park subdivision must have a minimum of 5 acres overall. A maximum of 75% of the park may have parcels in accordance with the minimum lot size requirements of the underlying zone (see Table 21-2). The remaining 25% of the parcels must be 4 acres in size or larger.(Ord. 1100, passed 7-6-04; Am. Ord. 1167, passed 11-20-06; Am. Ord. 1172, passed 7-2-07)